TeraFlex LCG (Low Center-of-Gravity) Long Arm Suspension Systems are engineered for hardcore Jeepers who don’t want to give up on-road comfort and control in their TJ Wrangler/Unlimited. These complete systems include all necessary components including LCG Long Arm Brackets. Up front, the Pro LCG expands the performance of the stock 5-link suspension configuration with our adjustable LCG Long Control Arms & Brackets. Our Front Upper LCG Long Control Arms are more than 9″ longer than stock! Around back, the stock 5-link rear suspension and track bar are replaced by our adjustable Pro LCG Triangulated 4-Link Long Control Arm Suspension w/ Rear Axle Truss & Brackets. The rear upper brackets feature adjustable anti-squat tunability to fine tune the suspension. Our adjustable LCG Long Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 3-5″ lifts. On higher lifts, LCG Long Arm Brackets and 4-Link Rear Axle Truss reposition the frame-end control arm mounting points to relax suspension link angles. This reduces bushing stress during extreme droop as well as shock load transferred through the LCG Long Control Arms. The High Steer HD Adjustable Front Track Bar, Drop Pitman Arm (4″+), and Rear Upper Pro LCG Triangulated 4-Link Control Arms improve steering response, center the axles to optimize vehicle roll center, and reduce body roll to for unsurpassed handling. This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH). TeraFlex Pro LCG Long Arm Suspension Systems are the best of both worlds!
- responsive handling
- a Low Center-of-Gravity (LCG) Dependable performance
- 5″ Lift = 37″ Tire Maximum off-road articulation combined
- Rear Upper Pro LCG Triangulated 4-Link Control Arms improve steering response
- reduce NVH compared to other long arm kits High Steer HD Adjustable Front Track Bar
- shock load transferred through the LCG Long Control Arms LCG Long Arm Brackets are gusseted
- Rubicon 44 (call for other axles) TeraFlex Limited Lifetime Warranty against defects High Steer System
- 4-Link Rear Axle Truss reposition the frame-end control arm mounting points to relax suspension link angles
- reduced NVH Easy-to-install Lower LCG Long Arm Brackets don?t hinder transfer case access Full range of movement for off-road flex
- Beefs up Dana 30 or 44 front axle steering components Helps maximize steering component ground clearance Optimizes steering geometry for superior highway drivability
- reduce body roll to for unsurpassed handling Pro LCG High Steer System (# 1849000) recommended on 4″+ lift – optional on 5″ lift LCG Long Control Arm Suspension Systems
- LCG Long Arm Brackets
- rear adjustable LCG Long Control Arm system Rear triangulated 4-link suspension eliminates rear track bar Adjustable LCG Long Control Arms & Brackets balance front caster angle
- Optimize rear pinion angle
- Adjustable anti-squat tunability to fine tune the suspension Complete front
- Alpine Long Control Arms are constructed from durable 42mm x 4mm (upper) or 50mm x 5mm (lower) wall DOM tube for maximum strength On higher lifts
- zero worries
- Maximum ground clearance
- increased on-road comfort
- Alpine Long Arm Brackets are gusseted and reinforced for superior strength
- center the axles to optimize vehicle roll center
- articulation Fits all OEM axles including Dana 30
- reduces bushing stress during extreme droop
Attributes:
- GTIN: 00843885020455
- Brand Name: TeraFlex
- Included Parts: 5″ Lift Coil Springs (Front: # 1843502 & Rear: # 1844502)
- Included Parts0: 10″ Front Sway Bar Quick Disconnect Kit (3-6″ Lift) (# 1743090 – superseded by High Steer)
- Included Parts1: 10.5 in. Rear Sway Bar Link Kit (2.5-5 in. Lift) (# 1944011)
- Included Parts2: BellyUp Skid Plate Kit (# 4648403)
- Included Parts3: HD Steering Box Skid Plate Kit (# 4627400)
- Included Parts4: 2003-2006 TJ: 1″ Transfer Case Lowering Spacer Kit (# 1900103)
- Included Parts5: 1997-2002 TJ: Shift Linkage Plate Kit (# 1900001)
- Included Parts6: 2003-2006 TJ: Shift Linkage Plate Kit (# 1900003)
- Included Parts7: 26″ Stainless-Steel Braided Brake Line Kit – Front & Rear (# 4350400)
- Included Parts8: Exhaust Pipe Extension
- Included Parts9: Shock Extension Kit – Rear Lower (# 1544790)
- Included Parts: Pro LCG Long Control Arm & Bracket Kit – Front Upper (3-5″ Lift) (# 1443470)
- Included Parts0: All necessary hardware
- Included Parts1: And more
- Included Parts2: 9550 VSS Twin-Tube Shock Kit (5-6″ Lift) (# 1549500)Pro LCG Dana 30/44 High Steer System (4-6″ Lift) (# 1849000):
- Included Parts3: High Steer Knuckle (# 4828490)
- Included Parts4: High Steer HD Aluminum Drag Link Kit w/ Stock Taper Tie Rod Ends (# 4920244)
- Included Parts5: High Steer HD Aluminum Tie Rod Kit w/ Stock Taper Offset Tie Rod Ends (# 4920251)
- Included Parts6: Drop Pitman Arm (3.5-6″ Lift) (# 1922133)
- Included Parts7: High Steer Sway Bar Mount Kit (# 4959100)
- Included Parts8: Steering Stabilizer Mount (# 1510090)
- Included Parts9: 8″ Front Sway Bar Quick Disconnect Kit (0-2″ Lift) (# 1743092)Additional Components w/ High Steer System:
- Included Parts: LCG Long Control Arm & Bracket Kit – Lower (3-5″ Lift) (# 1447700)
- Included Parts0: High Steer HD Adjustable Front Track Bar (3.5-6″ Lift) (# 4923202)
- Included Parts1: High Steer Front Track Bar Axle Bracket Kit (# 1943070)
- Included Parts: Pro LCG 4-Link Long Control Arm & Bracket Kit – Rear Upper (3-5″ Lift) (# 1444870)
- Included Parts: HD Adjustable Front Track Bar (3.5-6″ Lift) (# 1743070 – superseded w/ High Steer)
- Included Parts: High Steer Front Track Bar Frame Bracket Kit (# 1743031)
- Included Parts: Drop Pitman Arm (3.5-6″ Lift) (# 4922133 – included in High Steer)
- Included Parts: 2.25″ Bump Stop Extension Kit – Front Upper (LCG Lift) (# 1910204)
- Included Parts: 1.75″ Bump Stop Extension Kit – Rear Lower (LCG Lift) (# 1949011)
- Install Time: 23 hours
- Material: Steel, polyurethane, rubber
Extended Information:
- Country of Origin: China
- Emissions : Emissions Compliance Exempt
- Life Cycle Status: Available To Order
Packing Information:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: 48 x 40 x 20 inches
- Weight: 452 lb
Professionally packed and fast shipping
Because of our long-standing partnership in a long-standing partnership with UPS, FedEx, DHL and many other world-class carriers, we can provide various shipping options. Our warehouse personnel is highly-skilled and will pack your products in accordance with our exact and accurate specifications. Before shipment, all items are carefully examined and secured. Everyday, we send to thousands of customers in multiple countries. This is a sign of our determination to be the largest online retailer on the planet. Warehouses and distribution centers are found in Europe and the USA.
Note: Orders that contain more than one product are assigned a specific processing time, based on the individual item.
Before shipping We will examine thoroughly the items you have ordered. The majority of orders will be sent within 48 hours. The delivery time is between 3-7 working days.
Returns
The stock is dynamic and we cannot fully manage it due to the fact that many parties are involved, which includes our factory and warehouse. The actual inventory can fluctuate at any time. It is possible that the stocks could be depleted after your order has been processed.
The policy is for 30 days. Unfortunately, if 30 days have passed after you bought your item, we will not be able to provide a refund or exchange.
To be eligible for a return your product must be unopened and in the same condition as you received it. The item must be in its original packaging.
Related products
Exhaust System Kit
1992-1999 BMW 325i/ 328i/ M3 Cat-Back? Exhaust System Borla Factory Store
Parking Brake Cable
1987-90 YJ: Emergency Brake Cable (Right-Hand) TeraFlex Factory Store
Bumper D-Ring
1/2 Inch Shackle With 5/8 Inch Pin 5000 LB and Under Forged Steel Single Warn Factory Store
Exhaust System Kit
Exhaust System Kit
1994-1996 Chevrolet Impala SS/ Caprice Cat-Back? Exhaust System Touring Borla Factory Store
Exhaust System Kit
1995-1998 Porsche 911 Carrera Cat-Back? Exhaust System S-Type Borla Factory Store
Exhaust System Kit
Transfer Case Lowering Kit
1997-2002 TJ SWB: 1″ Transfer Case Lowering Spacer Kit TeraFlex Factory Store
Bumper D-Ring
1.2 Inch Pin Diameter; Up to 4000 Pound Weight Rating; Steel; Single Warn Factory Store
Air Suspension Compressor
Exhaust System Kit
1996-2002 Dodge Viper GTS/ RT-10 Cat-Back? Exhaust System S-Type Borla Factory Store
Exhaust Tail Pipe Tip
Locking Hub
Disc Brake Upgrade Kit
1991-06 Dana & Chrysler: Rear Disc Brake Conversion Kit TeraFlex Factory Store
Exhaust System Kit
Exhaust System Kit
1979-1982 Porsche 928 Cat-Back? Exhaust System S-Type Borla Factory Store
Exhaust System Kit
1997-2001 Jeep Cherokee XJ Cat-Back? Exhaust System Borla Factory Store
Exhaust System Kit
1987-1993 Ford Mustang GT Cat-Back? Exhaust System Borla Factory Store
Exhaust System Kit
1986-1981 Chevrolet Corvette C4 Cat-Back? Exhaust System S-Type Borla Factory Store
Uncategorized
1 Inch Width x 8 Foot Length 6400 Pound Breaking Strength Yellow Nylon Webbing Warn Factory Store
Parking Brake Cable
1991-95 YJ: Emergency Brake Cable (Left-Hand) TeraFlex Factory Store
Exhaust System Kit
1995-1997 Toyota Land Cruiser Cat-Back? Exhaust System Touring Borla Factory Store
Exhaust System Kit
Uncategorized
1997-2002 TJ SWB: 5.5 in. Adjustable Transfer Case Shift Linkage Rod TeraFlex Factory Store
